Search
Latest topics
Top posters
| agoenk (2099) |
| |||
| viyan_cs (1036) |
| |||
| b-joe (749) |
| |||
| ieyaz_Chuit (725) |
| |||
| Zell Aristocrats (667) |
| |||
| jun43d1 (638) |
| |||
| Hetro_fabio (314) |
| |||
| twinkblack (265) |
| |||
| suzee_tkj2 (237) |
| |||
| harmoko (184) |
|
New Generation..4G
New Generation..4G
by chielma Thu Nov 04, 2010 3:02 pm
4G refers to the fourth generation of cellular wireless standards. It is a successor to 3G and 2G families of standards. A 4G system is expected to provide a comprehensive and secure all-IP based solution where facilities such as ultra-broadband (giga-bit speed) Internet access, IP telephony, gaming services, and streamed multimedia may be provided to users.
Pre-4G technologies such as mobile WiMAX and first-release 3G Long term evolution (LTE) have been available on the market since 2006[1] and 2009[2][3][4] respectively, and are often branded as 4G. Current versions of these technologies do not fulfill the ITU-R requirements of data rates approximately up to 1 Gbit/s for 4G systems.
In all suggestions for 4G, the CDMA spread spectrum radio technology used in 3G systems and IS-95 is abandoned and replaced by frequency-domain equalization schemes, for example multi-carrier transmission such as OFDMA. This is combined with MIMO (Multiple In Multiple Out), e.g., multiple antennas, dynamic channel allocation and channel-dependent scheduling.
Background
The nomenclature of the generations generally refers to a change in the fundamental nature of the service, non-backwards compatible transmission technology, and new frequency bands. The first was the move from 1981 analog (1G) to digital (2G) transmission in 1992. This was followed, in 2002, by 3G multi-media support, spread spectrum transmission and at least 200 kbit/s, soon expected to be followed by 4G, which refers to all-IP packet-switched networks, mobile ultra-broadband (gigabit speed) access and multi-carrier transmission
Requirements
This article uses 4G to refer to IMT-Advanced (International Mobile Telecommunications Advanced), as defined by ITU-R..
An IMT-Advanced cellular system must have target peak data rates of up to approximately 100 Mbit/s for high mobility such as mobile access and up to approximately 1 Gbit/s for low mobility such as nomadic/local wireless access, according to the ITU requirements. Scalable bandwidths up to at least 40 MHz should be provided
4G Predecessors and candidate systems
3GPP Long Term Evolution (LTE)
Telia-branded Samsung LTE modem
The pre-4G technology 3GPP Long Term Evolution (LTE) is often branded "4G", but the first LTE release does not fully comply with the IMT-Advanced requirements. LTE has a theoretical net bit rate capacity of up to 100 Mbit/s in the downlink and 50 Mbit/s in the uplink if a 20 MHz channel is used — and more if Multiple-input multiple-output (MIMO), i.e. antenna arrays, are used.
The world's first publicly available LTE-service was opened in the two Scandinavian capitals Stockholm (Ericsson system) and Oslo (a Huawei system) on the 14 December 2009, and branded 4G. The user terminals were manufactured by Samsung [2] The two largest major mobile carriers in the United States and several worldwide carriers have announced plans to convert their networks to LTE beginning in 2011.
The physical radio interface was at an early stage named High Speed OFDM Packet Access (HSOPA), now named Evolved UMTS Terrestrial Radio Access (E-UTRA).
The first LTE USB dongles do not support any other radio interface.
LTE Advanced
LTE Advanced (Long-term-evolution Advanced) is a candidate for IMT-Advanced standard, formally submitted by the 3GPP organization to ITU-T in the fall 2009, and expected to be released in 2012. The target of 3GPP LTE Advanced is to reach and surpass the ITU requirements. LTE Advanced should be compatible with first release LTE equipment, and should share frequency bands with first release LTE
Mobile WiMAX (IEEE 802.16e)
The Mobile WiMAX (IEEE 802.16e-2005) mobile wireless broadband access (MWBA) standard (also known as WiBro in South Korea) is sometimes branded 4G, and offers peak data rates of 128 Mbit/s downlink and 56 Mbit/s uplink over 20 MHz wide channels[citation needed].
The world's first commercial mobile WiMAX service was opened by KT in Seoul, South Korea on 30 June 2006.[1]
Sprint Nextel has begun using Mobile WiMAX, as of September 29, 2008 branded as a "4G" network even though current version does not fulfill the IMT Advanced requirments on 4G systems
IEEE 802.16m
The IEEE 802.16m evolution of 802.16e is under development, with the objective to fulfill the IMT-Advanced criteria of 1 Gbit/s for stationary reception and 100 Mbit/s for mobile reception.
UMB (formerly EV-DO Rev. C)
Main article: Ultra Mobile Broadband
UMB (Ultra Mobile Broadband) was the brand name for a discontinued 4G project within the 3GPP2 standardization group to improve the CDMA2000 mobile phone standard for next generation applications and requirements. In November 2008, Qualcomm, UMB's lead sponsor, announced it was ending development of the technology, favouring LTE instead.[10] The objective was to achieve data speeds over 275 Mbit/s downstream and over 75 Mbit/s upstream.
Flash-OFDM
At an early stage the Flash-OFDM system was expected to be further developed into a 4G standard.
iBurst and MBWA (IEEE 802.20) systems
The iBurst system (or or HC-SDMA, High Capacity Spatial Division Multiple Access) was at an early stage considered as a 4G predecessor. It was later further developed into the Mobile Broadband Wireless Access (MBWA) system, also known as IEEE 802.20.
Objective and approach
Objectives
4G is being developed to accommodate the quality of service (QoS) and rate requirements set by further development of existing 3G applications like mobile broadband access, Multimedia Messaging Service (MMS), video chat, mobile TV, but also new services like HDTV. 4G may allow roaming with wireless local area networks, and may interact with digital video broadcasting systems.
The 4G working group[clarification needed] has defined the following as objectives of the 4G wireless communication standard:
• Flexible channel bandwidth, between 5 and 20 MHz, optionally up to 40 MHz.[6]
• A nominal data rate of 100 Mbit/s while the client physically moves at high speeds relative to the station, and 1 Gbit/s while client and station are in relatively fixed positions as defined by the ITU-R,[11]
• A data rate of at least 100 Mbit/s between any two points in the world,[11]
• Peak link spectral efficiency of 15 bit/s/Hz in the downlink, and 6.75 bit/s/Hz in the uplink (meaning that 1 Gbit/s in the downlink should be possible over less than 67 MHz bandwidth)
• System spectral efficiency of up to 3 bit/s/Hz/cell in the downlink and 2.25 bit/s/Hz/cell for indoor usage.[6]
• Smooth handoff across heterogeneous networks,[12]
• Seamless connectivity and global roaming across multiple networks,[13]
• High quality of service for next generation multimedia support (real time audio, high speed data, HDTV video content, mobile TV, etc.)[13]
• Interoperability with existing wireless standards,[14]
• An all IP, packet switched network.[13]
• Femtocells (home nodes connected
• to fixed Internet broadband infrastructure)
Approaches
Consideration points
• Coverage, radio environment, spectrum, services, business models and deployment types, users.
Principal technologies
• Physical layer transmission techniques[15]
o MIMO: To attain ultra high spectral efficiency by means of spatial processing including multi-antenna and multi-user MIMO
o Frequency-domain-equalization, for example Multi-carrier modulation (OFDM) or single-carrier frequency-domain-equalization (SC-FDE) in the downlink: To exploit the frequency selective channel property without complex equalization.
o Frequency-domain statistical multiplexing, for example (OFDMA) or (Single-carrier FDMA) (SC-FDMA, a.k.a. Linearly precoded OFDMA, LP-OFDMA) in the uplink: Variable bit rate by assigning different sub-channels to different users based on the channel conditions
o Turbo principle error-correcting codes: To minimize the required SNR at the reception side
• Channel-dependent scheduling: To utilize the time-varying channel.
• Link adaptation: Adaptive modulation and error-correcting codes
• Relaying, including fixed relay networks (FRNs), and the cooperative relaying concept, known as multi-mode protocol
4G features
The 4G system was originally envisioned by the Defense Advanced Research Projects Agency (DARPA). The DARPA selected the distributed architecture, end-to-end Internet protocol (IP), and believed at an early stage in peer-to-peer networking in which every mobile device would be both a transceiver and a router for other devices in the network eliminating the spoke-and-hub weakness of 2G and 3G cellular systems.[16] Since the 2.5G GPRS system, cellular systems has provided double infrastructures: Packet switched nodes for data services, and circuit switched nodes for voice calls. In 4G systems, the circuit-switched infrastructure is abandoned, and only a packet-switched network is provided. This means that traditional voice calls are replaced by IP telephony.
Cellular systems such as 4G allows seamless mobility; thus a file transfer is not interrupted in case a terminal moves from one call (one basestation coverage area) to another, but handover is carried out. The terminal also keeps the same IP address while moving, meaning that a mobile server is reachable as long as it is within the coverage area of any server. In 4G systems this mobility is provided by the mobile IP protocol, part of IP version 6, while in earlier cellular generations it was only provided by physical layer and datalink layer protocols.
Some key features (primarily from users' points of view) of 4G mobile networks are as follows:
• High usability: anytime, anywhere, and with any technology
• Support for multimedia services at low transmission cost
• Personalization
• Intergrated services
Some candidate systems suggest having an open Internet platform.
[img]
[/img]
Pre-4G technologies such as mobile WiMAX and first-release 3G Long term evolution (LTE) have been available on the market since 2006[1] and 2009[2][3][4] respectively, and are often branded as 4G. Current versions of these technologies do not fulfill the ITU-R requirements of data rates approximately up to 1 Gbit/s for 4G systems.
In all suggestions for 4G, the CDMA spread spectrum radio technology used in 3G systems and IS-95 is abandoned and replaced by frequency-domain equalization schemes, for example multi-carrier transmission such as OFDMA. This is combined with MIMO (Multiple In Multiple Out), e.g., multiple antennas, dynamic channel allocation and channel-dependent scheduling.
Background
The nomenclature of the generations generally refers to a change in the fundamental nature of the service, non-backwards compatible transmission technology, and new frequency bands. The first was the move from 1981 analog (1G) to digital (2G) transmission in 1992. This was followed, in 2002, by 3G multi-media support, spread spectrum transmission and at least 200 kbit/s, soon expected to be followed by 4G, which refers to all-IP packet-switched networks, mobile ultra-broadband (gigabit speed) access and multi-carrier transmission
Requirements
This article uses 4G to refer to IMT-Advanced (International Mobile Telecommunications Advanced), as defined by ITU-R..
An IMT-Advanced cellular system must have target peak data rates of up to approximately 100 Mbit/s for high mobility such as mobile access and up to approximately 1 Gbit/s for low mobility such as nomadic/local wireless access, according to the ITU requirements. Scalable bandwidths up to at least 40 MHz should be provided
4G Predecessors and candidate systems
3GPP Long Term Evolution (LTE)
Telia-branded Samsung LTE modem
The pre-4G technology 3GPP Long Term Evolution (LTE) is often branded "4G", but the first LTE release does not fully comply with the IMT-Advanced requirements. LTE has a theoretical net bit rate capacity of up to 100 Mbit/s in the downlink and 50 Mbit/s in the uplink if a 20 MHz channel is used — and more if Multiple-input multiple-output (MIMO), i.e. antenna arrays, are used.
The world's first publicly available LTE-service was opened in the two Scandinavian capitals Stockholm (Ericsson system) and Oslo (a Huawei system) on the 14 December 2009, and branded 4G. The user terminals were manufactured by Samsung [2] The two largest major mobile carriers in the United States and several worldwide carriers have announced plans to convert their networks to LTE beginning in 2011.
The physical radio interface was at an early stage named High Speed OFDM Packet Access (HSOPA), now named Evolved UMTS Terrestrial Radio Access (E-UTRA).
The first LTE USB dongles do not support any other radio interface.
LTE Advanced
LTE Advanced (Long-term-evolution Advanced) is a candidate for IMT-Advanced standard, formally submitted by the 3GPP organization to ITU-T in the fall 2009, and expected to be released in 2012. The target of 3GPP LTE Advanced is to reach and surpass the ITU requirements. LTE Advanced should be compatible with first release LTE equipment, and should share frequency bands with first release LTE
Mobile WiMAX (IEEE 802.16e)
The Mobile WiMAX (IEEE 802.16e-2005) mobile wireless broadband access (MWBA) standard (also known as WiBro in South Korea) is sometimes branded 4G, and offers peak data rates of 128 Mbit/s downlink and 56 Mbit/s uplink over 20 MHz wide channels[citation needed].
The world's first commercial mobile WiMAX service was opened by KT in Seoul, South Korea on 30 June 2006.[1]
Sprint Nextel has begun using Mobile WiMAX, as of September 29, 2008 branded as a "4G" network even though current version does not fulfill the IMT Advanced requirments on 4G systems
IEEE 802.16m
The IEEE 802.16m evolution of 802.16e is under development, with the objective to fulfill the IMT-Advanced criteria of 1 Gbit/s for stationary reception and 100 Mbit/s for mobile reception.
UMB (formerly EV-DO Rev. C)
Main article: Ultra Mobile Broadband
UMB (Ultra Mobile Broadband) was the brand name for a discontinued 4G project within the 3GPP2 standardization group to improve the CDMA2000 mobile phone standard for next generation applications and requirements. In November 2008, Qualcomm, UMB's lead sponsor, announced it was ending development of the technology, favouring LTE instead.[10] The objective was to achieve data speeds over 275 Mbit/s downstream and over 75 Mbit/s upstream.
Flash-OFDM
At an early stage the Flash-OFDM system was expected to be further developed into a 4G standard.
iBurst and MBWA (IEEE 802.20) systems
The iBurst system (or or HC-SDMA, High Capacity Spatial Division Multiple Access) was at an early stage considered as a 4G predecessor. It was later further developed into the Mobile Broadband Wireless Access (MBWA) system, also known as IEEE 802.20.
Objective and approach
Objectives
4G is being developed to accommodate the quality of service (QoS) and rate requirements set by further development of existing 3G applications like mobile broadband access, Multimedia Messaging Service (MMS), video chat, mobile TV, but also new services like HDTV. 4G may allow roaming with wireless local area networks, and may interact with digital video broadcasting systems.
The 4G working group[clarification needed] has defined the following as objectives of the 4G wireless communication standard:
• Flexible channel bandwidth, between 5 and 20 MHz, optionally up to 40 MHz.[6]
• A nominal data rate of 100 Mbit/s while the client physically moves at high speeds relative to the station, and 1 Gbit/s while client and station are in relatively fixed positions as defined by the ITU-R,[11]
• A data rate of at least 100 Mbit/s between any two points in the world,[11]
• Peak link spectral efficiency of 15 bit/s/Hz in the downlink, and 6.75 bit/s/Hz in the uplink (meaning that 1 Gbit/s in the downlink should be possible over less than 67 MHz bandwidth)
• System spectral efficiency of up to 3 bit/s/Hz/cell in the downlink and 2.25 bit/s/Hz/cell for indoor usage.[6]
• Smooth handoff across heterogeneous networks,[12]
• Seamless connectivity and global roaming across multiple networks,[13]
• High quality of service for next generation multimedia support (real time audio, high speed data, HDTV video content, mobile TV, etc.)[13]
• Interoperability with existing wireless standards,[14]
• An all IP, packet switched network.[13]
• Femtocells (home nodes connected
• to fixed Internet broadband infrastructure)
Approaches
Consideration points
• Coverage, radio environment, spectrum, services, business models and deployment types, users.
Principal technologies
• Physical layer transmission techniques[15]
o MIMO: To attain ultra high spectral efficiency by means of spatial processing including multi-antenna and multi-user MIMO
o Frequency-domain-equalization, for example Multi-carrier modulation (OFDM) or single-carrier frequency-domain-equalization (SC-FDE) in the downlink: To exploit the frequency selective channel property without complex equalization.
o Frequency-domain statistical multiplexing, for example (OFDMA) or (Single-carrier FDMA) (SC-FDMA, a.k.a. Linearly precoded OFDMA, LP-OFDMA) in the uplink: Variable bit rate by assigning different sub-channels to different users based on the channel conditions
o Turbo principle error-correcting codes: To minimize the required SNR at the reception side
• Channel-dependent scheduling: To utilize the time-varying channel.
• Link adaptation: Adaptive modulation and error-correcting codes
• Relaying, including fixed relay networks (FRNs), and the cooperative relaying concept, known as multi-mode protocol
4G features
The 4G system was originally envisioned by the Defense Advanced Research Projects Agency (DARPA). The DARPA selected the distributed architecture, end-to-end Internet protocol (IP), and believed at an early stage in peer-to-peer networking in which every mobile device would be both a transceiver and a router for other devices in the network eliminating the spoke-and-hub weakness of 2G and 3G cellular systems.[16] Since the 2.5G GPRS system, cellular systems has provided double infrastructures: Packet switched nodes for data services, and circuit switched nodes for voice calls. In 4G systems, the circuit-switched infrastructure is abandoned, and only a packet-switched network is provided. This means that traditional voice calls are replaced by IP telephony.
Cellular systems such as 4G allows seamless mobility; thus a file transfer is not interrupted in case a terminal moves from one call (one basestation coverage area) to another, but handover is carried out. The terminal also keeps the same IP address while moving, meaning that a mobile server is reachable as long as it is within the coverage area of any server. In 4G systems this mobility is provided by the mobile IP protocol, part of IP version 6, while in earlier cellular generations it was only provided by physical layer and datalink layer protocols.
Some key features (primarily from users' points of view) of 4G mobile networks are as follows:
• High usability: anytime, anywhere, and with any technology
• Support for multimedia services at low transmission cost
• Personalization
• Intergrated services
Some candidate systems suggest having an open Internet platform.
[img][/img]
chielma- newbie tkj
- Posts : 21
Join date : 2010-10-07
Age : 30
Location : Jawa Tengah
Permissions in this forum:
You cannot reply to topics in this forum|
|
|
» Verifikasi UPK 2017
» Simulasi UBK tahap kedua
» Mengganti favicon di wordpress
» Undangan Pertemuan Rutin MGMP TKJ Gugus Bisman SMKN 1 Slawi bulan Desember 2016 sekaligus Pelatihan Mikrotik
» SPMI ( Sistem Penjaminan Mutu Internal ) untuk sekolah Model
» Pertemuan Rutin MGMP TKJ Gugus Bisman SMK Negeri 1 Slawi Bulan Oktober 2016
» INFO PPDB SMKN 1 SLAWI TAHUN PELAJARAN 2016 / 2017
» Kegiatan 3P Jurusan TKJ SMKN 1 Slawi